Physical properties of microwave and solid state synthesized La0.7Na0.3MnO3

We report the structural, magnetic, electrical and broadband microwave absorption in La_0.7Na_0.3MnO₃ sample synthesized by microwave (MW) irradiation (Na_0.3LMO_MW) and compare them to the sample synthesized by solid-state (SS) reaction method (Na_0.3LMO_SS). Single phase Na_0.3LMO_MW was synthesized at 800 °C in 30 min, whereas, Na_0.3LMO_SS sample was obtained by sintering at 1200 °C for 48 h. Although both these samples show ferromagnetic transition at T_C ～324.8 K, the MW-synthesized sample shows distinct physical properties: broad ferromagnetic transition, smaller saturation magnetization, a large difference between the magnetic ordering and metal-insulator transition temperatures, a large high-field magnetoresistance, a table top-like magnetocaloric effect, and a large low-field microwave absorption compared to the solid state synthesized sample. These differences are suggested to arise from magnetic heterogeneity induced by smaller grain size and surface spin disorder in the MW synthesized La_0.7Na_0.3MnO₃.     

Initial and residual trapping of hydrogen and nitrogen in Fontainebleau sandstone using nuclear magnetic resonance core flooding

Hydrogen is among a few promising energy carriers of the future mainly due to its zero-emission combustion nature. It also plays an important role in the transition from fossil fuel to renewable. Hydrogen technology is relatively immature and serious knowledge gaps do exist in its production, transport, storage, and utilization. Although the economical generation of hydrogen to the scale required for such transition is still the biggest technical and environmental challenge, unlocking the large-scale but safe storage is similarly important. It is difficult to store hydrogen in solid and liquid states and storing it in the gaseous phase requires a huge volume which is just available in subsurface porous media. Sandstone is the most abundant and favourable medium for such storage as carbonate rock might not be suitable due to potential geochemical reactions.It is well established in the literature that interaction of the host rock-fluid and injected gas plays a crucial role in fluid flow, residual trapping, withdrawal, and more generally storing capacity. Such data for the hydrogen system is extremely rare and are generally limited to contact angle measurements, while being not representative of the reality of rock-brine-hydrogen interaction(s). Therefore, we have conducted, for the first time, a series of core flooding experiments using Nuclear Magnetic Resonance (NMR) to monitor hydrogen (H₂) and Nitrogen (N₂) gas saturations during the drainage and imbibition stages under pressure and temperature that represent shallow reservoirs. To avoid any geochemical reaction during the test, we selected a clean sandstone core plug of 99.8% quartz (Fontainebleau with a gas porosity of 9.7% and a permeability of 190 mD).Results show significantly low initial and residual H₂ saturations in comparison with N₂, regardless of whether the injection flow rate or capillary number were the same or not. For instance, when the same injection flow rate was used, H₂ saturation during primary drainage was 4% and it was <2% after imbibition. On other hand, N₂ saturation during the primary drainage was 26% and it was 17% after imbibition. However, when the same capillary number of H₂ was utilised for the N₂ experiment, the N₂ saturation values were ～15% for initial gas saturation and 8% for residual gas saturation. Our results promisingly support the idea of hydrogen underground storage; however, we should emphasise that more sandstone rocks of different clay mineralogy should be investigated before reaching a conclusive outcome.     

Effects of multiple freeze–thaw cycles on meat quality,nutrients, water distribution and microstructure in bovine rumen smooth muscle

This study investigated the effect of 5 freeze–thaw cycles (freezing at −18°C for 12 h and then thawing at 4°C for approximately 12 h) on the meat quality, proximate composition, water distribution and microstructure of bovine rumen smooth muscle (BSM). As the number of freeze–thaw cycles increased, BSM pH, shear force, water content and protein content decreased by 3.06%, 35.50%, 14.49% and 21.11%, respectively, whereas BSM thawing loss, cooking loss, pressing loss, total aerobic count (TAC), ash content and fat content increased by 108.12%, 47.75%, 78.33%, 90.99%, 105% and 35.20%, respectively. The freeze–thaw cycles resulted in greater protein and lipid oxidation, as evidenced by a 36.46% reduction in the sulfhydryl content and a 209.06% and 338.46% increase in the carbonyl and malondialdehyde contents, respectively. Ice crystal formation disrupted the structural integrity of the muscle tissue. Low-field nuclear magnetic resonance results showed that the freeze–thaw cycles prolonged the relaxation times (T_2b, T₂₁ and T₂₂), indicating that immobile water shifted to free water, and consequently, free water mobility increased. After 3 freeze–thaw cycles, the decline in shear force slowed, the increase in thawing loss became accelerated, and the TAC approached the domain value (6 log colony-forming units/g). Therefore, the number of freeze–thaw cycles of smooth muscle during transport, storage and distribution should be controlled to 3 or fewer. The current results provide a theoretical basis and data support for the further utilisation and culinary processing of smooth muscle.     

Novel energy-saving window coating based on F doped TiO2 nanocrystals with enhanced NIR shielding performance

To reduce the energy consumption of cooling in the hot summer days, searching for novel NIR shielding materials for buildings is of great value. In this report, monodispersed F doped TiO₂ nanocrystals with an average size of 8.6 nm were synthesized as novel solar shielding materials for energy-saving windows. All the products adopted an anatase TiO₂ structure. After doping of F ions, the morphology of TiO₂ was transformed from an irregular shape to a pseudospherical shape. The Raman shift and XPS depth analysis confirmed the successful doping of F⁻ ions into the lattice oxygen sites in the TiO₂ structure. The introduction of F⁻ ions generated free electrons and bulk Ti³⁺ in TiO₂ crystals, which activated a localized surface plasmon resonance (LSPR) absorption in the NIR region. Correspondingly, the NIR shielding performance of the TiO₂ films improved with increasing F doping amounts. The NIR shielding value of the films increased from 1.3% to 43.2% when the molar ratio of F to Ti increased from 0 to 0.3. The reason can be attributed to the enhanced NIR absorption induced by the increased electron concentration after doping of fluorine ions. The F–TiO₂ films showed superior visible transmittance (90.1–96.7%). Moreover, the F–TiO₂ films lowered the indoor temperature of the heat box by 5.3 °C in the thermal tests. Overall, the prepared F–TiO₂ nanocrystals show a great potential to be used for energy-saving windows.     

二连盆地乌兰花凹陷特低渗安山岩储层的有效性评价

针对二连盆地乌兰花凹陷安山岩储层的特性认识不清、有效储层划分不准确的问题，利用岩心薄片、黏土矿物分析、物性测试以及核磁共振实验等手段开展了岩石储集空间特征、岩石蚀变程度、测井响应特征分析。在此基础上，重点开展了基于核磁共振实验的安山岩储层有效孔隙度计算模型研究，开发了相适应的测井解释评价模块，并结合常规测井和试油结果建立了安山岩储层的分类标准。结果表明：安山岩储集空间具有发育"微孔"、"杏仁孔"双孔隙的特征，且以微孔为主；根据不同蚀变程度所建立的安山岩有效孔隙度计算模型具有很高的精度，平均绝对误差为0.16%，平均相对误差为19.40%；新测井解释储层分类标准在实际应用中与试油结论具有很好的一致性，有利于乌兰花凹陷安山岩有效储层的精确划分，并为该地区开发方案的设计及可采储量评价提供技术支持。     

Analysis and optimisation of particle mixing performance in fluid phase resonance mixers based on Euler/Lagrange calculations

A novel mixing principle utilising oscillating liquid columns was analysed numerically with regard to particle dispersion characteristics. For producing fluid oscillations a pipe (diameter 100 mm) was immersed centrally into a vessel (diameter 450 mm) filled with liquid (filling height 700 mm) and periodically pressurised (frequency 1.2 Hz). The outlet geometry of the central pipe, just ending near the vessel bottom, has a strong effect on mixing and was optimised in this study. The principle of a FPR-mixer does not require rotating stirrers and in the turbulent regime it has power numbers comparable to propellers. The numerical calculations were conducted by a Euler/Lagrange approach neglecting two-way coupling as well as inter-particle collisions for clarity in order to only focus on the effect of interfacial forces on particle dispersion. The continuous phase was calculated in an unsteady way based on the Reynolds-averaged equations combined with the k-ω-SST (shear stress transport) turbulence model. Lagrangian tracking was conducted considering all relevant forces; drag, gravity/buoyancy, fluid inertia, added mass, Basset force and transverse lift forces due to shear and particle rotation. The importance of these forces was analysed with respect to the turbulent particle Stokes number (considered range 0.004 < St < 10.0) and particle/liquid density ratio (i.e. 1.05, 1.5 and 2.5). Finally, the significance of Basset force and shear-rotation lift force (i.e. Magnus effect) on the dispersion process was quantified by mixing parameters.     

Measurements of thermal-neutron capture cross-section of Cesium-135 by applying mass spectrometry

ABSTRACT

The thermal-neutron capture cross-section (σ₀) and resonance integral (I₀) were measured for the ¹³⁵Cs(n,γ)¹³⁶Cs reaction by an activation method and mass spectrometry. Because of difficulty in the preparation of pure ¹³⁵Cs samples, we used ¹³⁵Cs contained as an impurity in a normally available ¹³⁷Cs standard solution. An isotope ratio of ¹³⁵Cs and ¹³⁷Cs in a standard ¹³⁷Cs solution was measured by mass spectrometry to quantify ¹³⁵Cs. Cesium-135 impurity along with the ¹³⁷Cs standard solution was irradiated at the hydraulic conveyer of the research reactor in the Institute for Integral Radiation and Nuclear Science, Kyoto University. Wires of Co/Al and Au/Al alloys were used as neutron monitors to measure thermal-neutron fluxes and epi-thermal Westcott’s indices at an irradiation position. A gadolinium filter was used to measure the σ₀, and a value of 0.133 eV was taken as the cut-off energy. Gamma-ray spectroscopy was used to measure induced activities of ¹³⁷Cs, ¹³⁶Cs and monitor wires. On the basis of Westcott’s convention, the σ₀ and I₀ values were derived as 8.57 ± 0.25 barn, and 45.3 ± 3.2 barn, respectively. The value of σ₀ obtained in the present study agreed within the limits of uncertainties with the past-reported value of 8.3 ± 0.3 barn.     

Automatic brain tissue segmentation in MR images using hybrid atlas forest based on confidence-weighted probability matrix

The segmentation of specific tissues in an MR brain image for quantitative analysis can assist the disease diagnosis and medical research. Therefore, a robust and accurate method for automatic segmentation is necessary. Atlas-based-method is a common and effective method of automatic segmentation where an atlas refers to a pair of image consist of an intensity image and its corresponding label image. Apart from the general multi-atlas-based methods, which propagate labels through the single atlas then fuse them, we proposed a hybrid atlas forest based on confidence-weighted probability matrix to consider the atlases set as a whole and treat each voxel differently. In the framework, we first register the atlas to the image space of target and calculate the confidence of voxels in the registered atlas. Then, a confidence-weighted probability matrix is generated and it augments to the intensity image of the atlas or target for providing spatial information of the target tissue. Third, a hybrid atlas forest is trained to gather the features and correlation information among the atlases in the dataset. Finally, the segmentation of the target tissues is predicted by the trained hybrid atlas forest. The segment performance and the components efficiency of the proposed method are evaluated on the two public datasets. Based on the experiment results and quantitative comparisons, our method can gather spatial information and correlation among the atlases to obtain an accurate segmentation.     

微纳米气泡形成羟基自由基的研究进展

从微纳米气泡溶液中是否可以产生·OH、·OH的鉴别方法、·OH的生成机理以及强化·OH的生成等几个方面论述了微纳米气泡溶液中生成·OH的研究进展。电子自旋共振技术和荧光分光光度法作为检测·OH的2种技术,均存在一定的误导性,对于荧光分光光度法,最重要的就是排除H2O2的干扰。此外,目前要获得含有高浓度·OH的微纳米气泡溶液,使用氧气气源是前提,且可通过超声空化或使用铜作为催化剂等进一步增强·OH的生成。虽然机理问题尚未明确,但微纳米气泡技术已在农业、养殖业和废水处理等领域有了广泛的应用,并展现出良好的应用前景。     

Greatly improved NIR shielding performance of CuS nanocrystals by gallium doping for energy efficient window

In this work, gallium doped copper sulfide (Ga-doped CuS) nanocrystals were prepared using a solvothermal method. The effects of Ga doping on the crystal structures, chemical composition, morphology, optical properties and thermal performance of copper sulfide (CuS) were investigated. The Ga-doped CuS nanocrystals had a hexagonal structure comparable to that of pure CuS. The Cu⁺/Cu²⁺ ratio first decreased and then increased with increasing Ga³⁺ doping. Both CuS and Ga-doped CuS exhibited nanoplate and nanorod morphologies. The visible transmittance of the Ga-doped CuS films was in the range of 61–77.1%. Importantly, the near-infrared (NIR) shielding performance of the films can be tuned by adjusting the concentration of the Ga dopant. The NIR shielding value of the optimal Ga-doped CuS film was 72.4%, which was approximately 1.5 times as high as that of the pure CuS film. This can be ascribed to the enhanced plasmonic NIR absorption that resulted from an increase in the hole concentration after doping with Ga³⁺ ions. In the thermal performance test, the Ga-doped CuS film lowered the interior temperature of the heat box by 9.1 °C. Therefore, the integration of good visible transmittance and high NIR shielding performance make the Ga-doped CuS nanocrystals a promising candidate for energy-efficient window coatings.